AbstractThe HST WPD-2500G is a benchtop electronic fatigue testing machine: five stations, 2500N, servo electric cylinder drive, for the compression fatigue test of very small samples. Three stations test at room temperature, two stations are equipped with high-temperature boxes for testing at high পড়ুন আরও >>

AbstractThe HST WAW300F is a 300kN electro-hydraulic single space servo universal testing machine for metallic materials: a top-mounted, bidirectional differential actuator runs tension and compression in one single space, a clearance-free four-column frame adjusts the test space with the actuator iপড়ুন আরও >>

AbstractThe HST YAW2000D is a 2000kN computer control compression testing machine for cement, mortar, brick, concrete and other building materials: servo motor acceleration and deceleration control, electric ball screw test space adjustment, computer auto control of the loading process, and the YAW-পড়ুন আরও >>

AbstractThe HST CPJ3015 is a universal vertical profile projector for the length, angle, contour and surface shape of mechanical parts: a Ø312 screen, a 10X standard objective with 20X, 50X and 100X options, 24V/150W halogen transmitted and 21V/150W halogen reflecting illumination, and the DC-3000 পড়ুন আরও >>

AbstractThe HST MWW-50E is a Wood-based Board Universal Testing Machine built on a 50kN four-column, two-ball-screw frame: a 0.001-1000 mm/min crosshead, closed-loop control of force, displacement and deformation, and a standard fixture set of seven grips that covers the classic wood-based panel tesপড়ুন আরও >>

AbstractThe HST-UV-A is a Programmable UV Aging Test Chamber whose touch screen controller runs two test modes - fixed value and multi-segment program - shows the current irradiation intensity and blackboard temperature live, accumulates the front and back lamp hours, and keeps a full data trail: reপড়ুন আরও >>

AbstractThe HST JWJ-10 is a Metal Wire Reverse Bend Testing Machine that runs repeated bending tests on wires from 1 to 10mm diameter: a ±90deg bend angle at up to 60rpm, a touch screen with automatic counting up to 999,999 bends, a photoelectric detector that shuts the machine down the moment the পড়ুন আরও >>

AbstractThe HST-XNR-400DT is a touch screen display Melt Flow Indexer that reports both MFR and MVR from one extrusion run: a 0.1-800.00 g/10min (MFR) and 0.1-800.00 cm3/10min (MVR) measuring range, a barrel from room temperature to 450deg C held at ±0.2deg C, eight gravity load grades from 0.325 tপড়ুন আরও >>